This bath sealing strip is designed to Effectively prevent water from overflowing the bathroom, keep the bathroom clean.
Width: 30mm / 1.18in
Height: 40mm / 1.57in
1. Can be used all year round.
2. Use at home, hotel bathrooms, or even as your RV shower door seal.
3. Effectively prevent water from overflowing the bathroom, keep the bathroom clean.
4. Strong adhesive backing, you can tear and stick it on the corresponding area directly.
1. Wiping off the water and dust on the ground.
2. Determining the position of the water retaining strip and mark it with a pen on the ground.
3. Remove the adhesive and install the water barrier in the marked position.
4. Seal the strip at the position where the two ends of the water retaining strip are in contact with the wall.
5. Apply glue on both sides of the water stopper and apply evenly (using glue for better effect). Waiting for 24 hours.
Please keep the sticking surface clean and dry before sticking.
You could trim it into the length you need, practical to use and reduce waste.
1 x Bath Sealing Strip